Harken -10 Integral Backstay Cylinder, 35 mm Bore, 345 mm Stroke

MSRP: $2,234.00
$1,965.99
(You save $268.01 )
(No reviews yet) Write a Review
SKU:
HRHCI035130345BCC.NG
Weight:
8.00 LBS
Shipping:
Calculated at Checkout
Harken -10 Integral Backstay Cylinder (HCI035130345BCC.NG). 
35 mm Bore, 345 mm Stroke.
Harken’s integral hydraulic backstay adjuster provides the power to optimize sail shape quickly. The cylinder features a built-in, double-acting pump that delivers oil when the handle is both pushed and pulled. This moves oil through the system twice as fast as single-acting pumps on other integrals.
Technical Description
9/32 in
7 mm
13.2 in
343 mm
30 in
762 mm
7.4 lb
3.37 kg
1/2 in
12.7 mm
1243 lb
564 kg
2487 lb
1128 kg
3490 lb
1692 kg
4960 lb
2250 kg
12364 lb
5608 kg

Assemblies include a hardcoat-anodized aluminum cylinder and pump, valve, and stainless pump handle with three attachment options: pin installs handle permanently; O-ring secures handle in socket, but is not permanent; nonlocking handle installs without O-ring and roll pin. All pins and plugs are stainless steel. Cylinders include a clevis on both ends. Standard eye-jaw toggles fit all Harken® cylinders.

The pressure release knob turns clockwise to close and pump, counterclockwise to release. When closing the pump, the knob cannot be over-tightened by hand, preventing damage to the valve. Release speed depends on how far open the knob is turned. Pressure relief is factory set to prevent crew from over-tensioning the backstay.