null

Harken Micro Cam-Matic II Cam Cleat

MSRP: 32£
28£
(You save )
(No reviews yet) Write a Review
SKU:
HR468
Weight:
0.06 LBS
Shipping:
Calculated at Checkout

Manufacturer part #: 468

Technical Description
Micro Cam-Matic®
7/8 in
22 mm
1 7/8 in
48 mm
15/16 in
24 mm
0.93 oz
26 g
3/32 in
2 mm
1/4 in
6 mm
1 1/16 in
27 mm
200 lb
91 kg
400 lb
181 kg
Aluminum
Note:Use #8 (4 mm) RH fasteners.
Manufacturer part #: 468

Tired of banging on the mainsheet to uncleat, or watching the cleat let go at just the wrong moment? Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. With a downward flick of the wrist, the sheet snaps into the cam-and stays exactly where you want it. Pull up and the cleat immediately releases-even under the highest loads. Smooth teeth grip line of all sizes including the small diameter hard line preferred by racers.

Easy-Open Ball Bearing Cams
Multiple rows of high-load ball bearings reduce friction so cams open easily for snap-down, rather than draw-through cleating.

The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.

The Teflon® surface of the aluminum Cam-Matic® improves the cleat's fast line engagement. The Cam-Matic® is the only cleat that will engage under maximum line tension.

Protective Tooth Design
Rounded teeth hold securely by squeezing rather than cutting into line to reduce wear.

High-Wear or Lightweight Models
Aluminum Cam-Matics® are Hardkote-anodized for high-load, high-wear, continuous adjustment applications. Available in Micro, standard and Offshore sizes. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent. Available in Micro and standard sizes.

Long Lasting Protection
Ball bearings and Carbo-Cams® UV-stabilized with carbon-black additive for maximum protection.