null

Harken Trigger Cleat

MSRP: $185.70
$143.92
(You save $41.78 )
(No reviews yet) Write a Review
SKU:
HR418
Availability:
DISCONTINUED BY MANUFACTURER
Weight:
0.35 LBS

Manufacturer part #: 418

Technical Description
Trigger Cleat
1 3/8 in
35 mm
2 1/2 in
64 mm
3 in
76 mm
5.6 oz
159 g
3/16 in
5 mm
1/2 in
12 mm
2 in
51 mm
500 lb
227 kg
1000 lb
454 kg
Stainless Steel
#10 (5 mm) TH fastenersManufacturer part #: 418

Tired of banging on the mainsheet to uncleat, or watching the cleat let go at just the wrong moment? Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. With a downward flick of the wrist, the sheet snaps into the cam-and stays exactly where you want it. Pull up and the cleat immediately releases-even under the highest loads. Smooth teeth grip line of all sizes including the small diameter hard line preferred by racers.

Easy-Open Ball Bearing Cams
Multiple rows of high-load ball bearings reduce friction so cams open easily for snap-down, rather than draw-through cleating.

The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.

The Teflon® surface of the aluminum Cam-Matic® improves the cleat's fast line engagement. The Cam-Matic® is the only cleat that will engage under maximum line tension.

Protective Tooth Design
Rounded teeth hold securely by squeezing rather than cutting into line to reduce wear.

High-Wear or Lightweight Models
Aluminum Cam-Matics® are Hardkote-anodized for high-load, high-wear, continuous adjustment applications. Available in Micro, standard and Offshore sizes. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent. Available in Micro and standard sizes.

Long Lasting Protection
Ball bearings and Carbo-Cams® UV-stabilized with carbon-black additive for maximum protection.