null

Sailtec -10 Backstay Ajduster for J/105 Pin Size 1/2" (12.3mm) * Pressure Gauge optional

MSRP: $2,082.00
$1,695.00
(You save $387.00 )
(No reviews yet) Write a Review
SKU:
SAI10CUSTJ105
Weight:
10.00 LBS
Shipping:
Calculated at Checkout
Type:
Non Locking

Sailtec Hydraulic Integral Adjuster

Technical Description

Cylinder Model No.

Piston

Rod Size

Tension Cable/Wire Max Size

Pin

Diameter

Length Stroke

Hydraulic Integral Adjuster

inch mm lb kg in  mm in mm

closed

in

closed

mm

open

in

open

mm

in mm
-8 Standard 08SI 1/2" 12.7 3250 1477 1/4" 6.4 7/16" 11.1 21.9 555 30.8 781 8.9 226
-8 Long 08LI                 26 660 38.8 981 12 9 327
-10 Standard 10SI 5/8" 15.9 4750 2152 9/32" 7 1/2" 12.7 23 584 32.5 824 9.5 241
-10 Long 10LI                 27 686 40.5 1029 13.5 343
-10 Sid Locking 10SLKI                 39 990 47.5 1206 8.5 216
-10 Long Locking 10LLKI                 48 1219 60.5 1536 12.5 318
-12 Standard 12SI 3/4" 19 6500 2945 5/16" 8 5/8" 15.9 24 609 34 863 10 254
-12 Long 12LI                 28 711 42 1068 14 356
-12 Sid Locking 12SLK I                 40 1016 49 1244 9 229
- 2 Long Locking 12LLKI                 49 1244 62 1574 13 330
-17 Standard 17SI 3/4" 19 8750 3963 3/8" 9.6 5/8" 15.9 25 635 35 890 10 254
-17 Long 17LI                 29 737 43 1092 14 356
-17 Std Locking 17SLKI                 44 1178 53 1346 9 229
-17 Long Lockina_ 17LLKI                 53 1346 66 1676 13 330
-22 Standard 22SI 718" 22 11500 5209 7/16" 11.2 3/4" 19 29 737 40 1016 11 279
-22 Long 22LI                 33 838 49 1244 16 408
-22 Std Locking 22SLKI                 48 1219 58 1473 10 254
-22 Std Locking 22LLKI                 57 1448 70.1 1795 13.8 319
-30 Standard 30SI 1" 25.4 20600 9332 1/2" 12.7 718" 25.4 34 864 45 1142 11 279
-30 Long 30LI                 40 1016 56.5 1435 16.5 421
 
• Cylinder: All Sailtec cylinders are aircraft-quality aluminum alloy, precision gun drilled, honed, polished, and anodized to retain their attractive appearance and performance for years of service.
• Pressure Relief Valve: The pressure relief valve is one of the more important features on all Sailtec integral adjusters. This feature will not allow over tensioning of the rigging.
• Valving: Sailtec uses a cartridge valve to control pressure. The valve is a ball valve and can be replaced in the field. This type of cartridge release valve prevents damage to the pump and is more reliable than other brands.
• Gauge: Sailtec gauges feature wide-arc, dual-scale (psi/kg) dial faces for the accurate reading of pressure.
• Piston/Piston Rod: Type 316 stainless steel piston rods are larger and stronger than competing hydraulics on the market, an important feature to prevent bending and premature seal wear caused by side loads.
• Stroke: Integrals are available in both standard and long stroke.