Topper Traveller Pack - Maximum Tension with Zero Stretch

Upgrade your Topper with the Allen Topper Traveller Pack, designed to keep your traveller line tight and secure with zero stretch. Not only does this pack enhance performance, but it also adds a touch of style to your boat.

Key Features:

• Allen High Load Thimble: Engineered for effortless tensioning, this thimble makes it easy to pull the traveller line tight while adding a splash of colour to your boat's rigging.
• 20mm Dynamic Swivel Block: The pack includes a 20mm dynamic swivel block to replace the block on your toe straps, giving you greater control and ease when tightening the traveller line.
• Pre-Spliced and Pre-Stretched Line: The line comes pre-spliced and pre-stretched, ensuring it stays exactly where you set it, giving you consistent performance on the water.
• Class Legal: Fully compliant with class rules, making this pack perfect for competitive sailing.
• Tighten your traveller with ease and sail with confidence using the Allen Topper Traveller Pack!

Traveller Installation Instructions:

• The traveller comes pre-spliced with a thimble slightly off-centre.
• Take the longer tail and feed it front to back through the plastic bullseye fairlead on one aft corner of the boat (either side is fine).
• Pull some line through and attach your mainsheet traveller block (not included).
• Continue threading the line back to front through the bullseye fairlead on the opposite corner.
• Tie a bowline in this end.
• Take the shorter tail, feed it through the bowline loop, including the thimble. Pull tight to form a triangle at the back of the boat.
• Lead the short tail through the Clamcleat inside the cockpit, up to the thimble, and back down through the cleat again.
• Install a 20mm block at the rear of your toe straps.
• Run the traveller line through this block to create a user-friendly purchase system while sailing.