best live chat
  Loading... Please wait...
  • Image 1

CDI FF1BB Jib and Genoa Furler (Max. headstay length 21')

$536.06
$645.00 (You save $108.94)
Ships within 1-3 days directly from Canada. Not eligible for refund.
SKU: CDIFF1BB
Brand:
CDI
Weight:
25.00 LBS
Shipping:
Calculated at checkout
Qty
    Manufacturer part #: FF1BB Furler.

    The CDI Flexible Furler can be used to both reef and furl your sail in any wind condition. CDI has simplified the design, thereby increasing the system's reliability while lowering the cost.

    Technical Description
    SystemMain
    Stay Length
    Max
    Wire Size
    Turnbuckle
    Size
    Luff
    Dimensions
    Drum
    Diameter
    FF1 21' 1/8" 1/4" 0.5 x 1.3" 3.5"
    FF2 29' 3/16" 1/4" - 5/16" 0.6 x 1.4" 4.0"
    FF4 33' 7/32" 1/4" - 3/8" 0.92 x 1.8" 5.8"
    FF6 39' 1/4" 5/16" - 7/16" 0.92 x 1.8" 5.8"
    FF7.0 47' 1/4" 7/16" - 1/2" 0.92 x 1.8" 6.5"
    FF9.0 53' 5/16" 1/2" 1.2 x 2.2" 6.5"
    CDI FF1BB Furler Dimensions
    CDI Flexible Furler FeaturesAmerican
    Luff Deduct 13.0 in
    Luff Tape #6
    Min Tack Height 6.0 in
    A 1.3 in
    B 4.5 in
    C 9.0 in
    D 3.5 in
    E 7.0 in
    F 1.3 in
    G 2.5 in
    H 2.0 in
    I 2.0 in
    J 7.8 in
    K 17.5 in

    Dimensons A-E depend on the length of the toggle at the bottom of the turnbuckle. Dimensions shown assume Merriman (now MacWhyte) turnbuckle.

    Dimension H is approximate. The length required may be greater to provide adequate clearance for a Spinnaker halyard, or may be slightly shorter to accommodate a full hoist sail. Dimensons H is intended to provide adequate clearance to allow headstay adjustments without the furler binding at the top. Dimensons H is also necessary to provide clearance between the mast and the halyard top fitting.


    Simplicity
    Often, the simplest product is the best product. The Flexible Furler has one-eighth the number of parts of competitive systems and is the easiest to install, operate and maintain. Plus, the Flexible Furler is backed by an unequaled warranty.

    A patented, one-piece, UV stabilized PVC luff extrusion. This luff extrusion is as stiff in torsion as a metal system, and yet can bend without kinking, unlike metal systems. There are no joints to fail and it is designed to be winched.

    A built-in halyard, eliminating troublesome halyard swivels and halyard wrap, maximizing reliability whether offshore or close to home.

    Reliable Furling
    CDI's durable one-piece urethane furling drum and stainless steel drum cover keeps the furling line in place. You can accidentally drop your anchor onto the Flexible Furler drum and expect it to keep working!

    Fail Safe Bearings
    Because of the built-in halyard, our rugged bearings see only a fraction of the load carried by other systems. Smaller Flexible Furlers typically use a one-piece solid plastic bearing, though some sailors prefer ball bearings as a convenience option (like having power steering in a small car).

    The FF7.0 and 9.0 come with ball bearings standard. We use 1/2" Torlon balls which roll over dirt easier and need less maintenance than the 1/4" balls you find in less rugged systems.

    Easy Installation
    Designed to be installed over your existing stay, cutting in half the installation time.

    Low Maintenance
    We recommend that you rinse your bearing with a hose every 5 years (a 5 minute procedure).That's it! And you don't have to drop your sail to rinse the bearing.



    CDI Flexible Furler FF1BB Manual.pdf

    Call us for technical support, customer service and product information (877) 240-VELA (8352)

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    Sign up for our newsletter

    View Cart Go To Checkout